Remote Desktop Scan Button
Scan button doesn't work in Remote Desktop.
If scan button is not working in ScanEmul when using Remote Desktop, check the following lists.
Checking procedure:
-
WLAN must be connected to an AP properly.
-
Check if you can browse a website (Eg: www.google.com).
-
Launch Remote Desktop and configure as below. \Flash Disk\Scanner\ScanEmul.exe
-
Close the option window and enter IP address that you wish to access.
-
Click connect button and enter appropriate ID and PW to connect to remote desktop.
-
Perform scan test after opening notepad or wordpad from remote desktop.
