×
Menu
Index
Search
 
   
   
   
 
 
 
SOTI AE enrollment method using Stage Programmer QR code
 
You can enroll SOTI AE on other terminals with the QR code created above.
 
There are 2 ways to enroll a QR code, a camera method and a scanner method.
In the case of the M3mobile terminal equipped with a 2D scanner, you can scan a QR code using an existing scanner without downloading a QR code reader
 
Please refer to the link video for a detailed explanation     SOTI QR code Video link
 
 
 
 
1     How to enroll a QR code using a camera
 
Enroll the QR code using the camera
 
For versions prior to Android 9, a WIFI connection is required to download the QR code reader
For Android 9 and later versions, No WIFI connection is required to download the QR code reader
 
 
 
 
1      Factory reset the terminal to register SOTI AE, or prepare an initialized terminal (Please note that all data is initialized at the time of factory reset)
        
         Settings - System - Reset Options - Erase all data

       
        
      
 
2      After Factory Reset and booting, the following screen will appear.
         Tap the 'Welcome' or 'Hi there' part 7 times to switch to the QR code reader screen.
       
            
 
       
        For versions prior to Android 9, a WIFI connection is required to download the QR code reader.
        After connecting WIFI and downloading the QR code reader, the camera appears
        Scan the QR code printed using the camera
         
        For Android 9 and later versions, no WIFI connection is required to download the QR code reader
        After tapping the screen 7 times, the QR code reader camera appears immediately
        Scan the QR code that was printed using the camera
 
 
 
3      After that, follow the procedure, and SOTI AE will be installed and registered using the WIFI registered above.
       
            
 
 
 
 
2     How to register a QR code using a scanner
 
In the case of the M3mobile terminal equipped with a 2D scanner, SOTI AE QR code recognition is possible only with the scanner without downloading a separate QR code reader.
(This function is available from Android 8 or higher)
 
 
 
 
1      Factory reset the terminal to register SOTI AE, or prepare an initialized terminal (Please note that all data is initialized at the time of factory reset)
        
         Settings - System - Reset Options - Erase all data

       
        
      
 
2      After performing Factory Reset and booting, the following screen will appear.
         On the current screen, pressing the scanner button emits a beam. AE registration proceeds when the QR code is recognized with the scanner beam
         (This function is available from Android 8 or higher)
       
      
 
 
3      After that, follow the procedure and SOTI AE will be installed and registered.