OS Update via USB Downloader(32bit only)
CAUTION
OS update via USB Downloader is NOT supported in Vista or Windows7.
Driver installation only needs to be done for the first time.
I. Installation
1. Download the USB_Downloader and OS update files to your PC.
2. Turn off the device by pressing the power button for approximately 10 seconds.
Then, while pressing the right arrow button, press power button to enter boot menu.
3. From the boot menu, press ‘1’ to select USB Update. Connect USB Cable... message will display on the screen.
4. Place M3 ORANGE(OX-10) on the cradle and connect to a PC via USB cable. ‘Found New Hardware’ message will be displayed on your PC.
5. If the device is connected to the PC for the first time, Microsoft windows will start New Hardware Wizard automatically. From the options, choose “No, not this time”, then click “Next>” to proceed.
6. Choose “Install from a list or specific location (Advanced)” option then proceed.
7. Check “Include this location in the search:” option then, specify the location of the folder which contains the driver files: M3BlackUSB.sys, M3Black.inf.
8. When the warning window appears, click “Continue Anyway”.
9. Then, click 'Finish' to complete driver installation.
10. When it is ready, run USBLoad.exe. Click on Open button as indicated on the image to load necessary files.
Please load files in the following order:
a. EBOOT.nb0 b. FLASH.bin
11. When all files are loaded, click Download to start OS update.
12. Reset the device when OS update is complete.
