Remote Desktop
Scan button doesn't work in Remote Desktop.
If scan button is not working in ScanEmul when using Remote Desktop, check the following lists.
Checking procedure:
1. WLAN must be connected to an AP properly.
2. Check if you can browse a website (Eg: www.google.com).
3. Launch Remote Desktop and configure as below. \Flash Disk\Scanner\ScanEmul.exe
4. Close the option window and enter IP address that you wish to access.
5. Click connect button and enter appropriate ID and PW to connect to remote desktop.
6. Perform scan test after opening notepad or wordpad from remote desktop.
l In case of CE6.0(M3 UL10, OX-10C, BLACK CE), please check below ‘Local Resource’ option.
