Summit WLAN(10 series) connection failure with some specific wireless routers(APs)
10 series couldn’t make association with a few wireless routers because of the mismatched ‘BASIC DATA RATES’.
Cause : 10 series are designed for the Basic data rates as 1M only but the issued AP are configured as 1, 2, 5.5, 11M, this difference can be configured by either AP or summit data set. If you cannot control the AP basic data rate, please update the SCU driver over 3.4.0.x.
<eg. Image : Cisco Aironet 1240AG AP supports this data rate configuration>
l How to solve by Summit WLAN? Please perform below both 1 and 2.