Use AC power while OS update process. Every information or configurations will be removed after OS update.
Data stored in Flash Disk will remain undeleted except Format is performed.
WARNING!
DO NOT install M3 ORANGE+ CE OS on M3 ORANGE+ / S units.
OS Update via MicroSD Card
MicroSD, less than 32GB of size, is required for OS update using MicroSD.
Copy downloaded files to root folder of MicroSD card. Then, insert the SD card to the device. MicroSD slot is located at the top of the PDA.
Attach fully charged battery. Then, while press and holding right arrow button, press the power button briefly to enter the boot menu. (AlphaNumeric) or (QWERTY)
M3 ORANGE+ Boot Menu
[ STANDARD BOOT MENU X.X.X ]
1) SD Download
2) USB Download
3) Clean Boot
4) Factory Reset
5) Device ID(UUID)
6) D_Serial :Comport8
7) All Format
Select Number
0) Exit : Launch OS Image
Hardware Version: NWSCBP
CPU : SAMSUNG-S5PC100 833MHz
RAM 256MB / ROM 1GB
From the boot menu, select 1) by pressing the number on the keypad to enter the SD update menu.
M3 ORANGE+ CE Boot Menu
[ SD Update MENU ]
1) EBOOT.BIN
2) NK.BIN
3) EBOOT+NK.BIN
Select Number :
0) Return to BOOT MENU!
Select EBOOT+NK.BIN to precede OS update.
M3 ORANGE+ CE Boot Menu
[ SD Update MENU ]
1. OS : S5STHQ6127EN
File : STCE27EN.BIN
0. Power Off
From the list of OS files, select the correct OS file and corresponding number. Update Start! Message will appear at the bottom of the screen. Note : If the SD card contain several Flash image, this page shows up to 4 detectable files randomly.
When OS update is complete, Download Complete Please Long Press Reset message will appear and the scanner LED on top left corner will blink. Then, press and hold the reset button at the back of the PDA.
USB Update(32bit only)
To update OS via USB, M3 ORANGE+ CE desktop cradle and USB cable is required.
Attach fully charged battery. Then, while press and holding right arrow button, press the power button briefly to enter the boot menu. (AlphaNumeric) or (QWERTY)
M3 ORANGE+ CE Boot Menu
[ BOOT MENU x.x.x ]
1) SD Download
2) USB Download
3) Clean Boot
4) Factory Reset
5) Device ID(UUID)
6) D_Serial : Debug Mode
Select Number :
0) Exit : Launch OS Image
Hardware Version: NWSCBP
CPU : SAMSUNG-S5PC100 833MHz
RAM 256MB / ROM 1GB
From boot menu, select 2) by pressing the number on the keypad. From USB download mode, select 1) USB Download. Then connect the PDA to PC using the desktop cradle.
M3 ORANGE+ CE Boot Menu
[ USB Download Mode ]
1) USB Download
0) Return to BOOT MENU!
M3 ORANGE+ CE Boot Menu
[ USB Download Mode ]
USB Download Ready..
Please Send Image File
0) Power Off
USB driver must be installed. To download USB driver click DONWLOAD.
Once the driver is installed successfully, send the OS image file from PC to the PDA through USBDown.exe. To download USBDown click DONWLOAD.
Launch USBDown from the PC and select All Image follow by Open.
Select .BIN file and click Open.
Then, click Start on USB Downloader to start OS update. Downloading message will appear on the bottom of the screen.
When OS update is complete, Download Complete Please Long Press Reset message will appear and the scanner LED on top left corner will blink. Then, press and hold the reset button at the back of the PDA.
(AlphaNumeric) or 
(QWERTY)
