OS Update via MicroSD card
|
Brand
|
M3 ORANGE(OX-10)+ CE
|
Model
|
M3 ORANGE(OX-10)+ CE
|
Date
|
2013.11.15
|
|
Issue type
|
OS Update
|
|
|
Note
|
WinCE 6.0
|
Preparation
l Download necessary files for OS update. It can be downloaded from M3 MOBILE ITC webpage.
Approved ITC account is required to access the webpage.
Note
l OS file naming rule:
|
Sx
|
ST
|
H
|
Q
|
xx
|
E
|
.bin
|
|
(1)
|
(2)
|
(3)
|
(4)
|
(5)
|
(6)
|
(7)
|
(1) indicates device model. S5 for ORANGE(OX-10)+ CE version. S4 for ORANGE(OX-10)+ WM version.
(2) ST indicates it is standard version.
(3) indicates phone type (HSDPA/GSM). Even if the PDA does not have phone option, OS file will show H or G.
(4) indicates LCD resolution. V for VGA and Q for QVGA. CE version is only available in QVGA.
(5) indicates version number.
(6) indicates language. K for Korean, E for English , etc.
There are two ways of updating OS in M3 ORANGE(OX-10)+ CE.
1. MicroSD Method
2. USB Method
MicroSD Update
MicroSD, up to 32GB of size, is required for OS update using MicroSD.
1. Copy downloaded files to root folder of MicroSD card. Then, insert the SD card to the device.
MicroSD slot is located at the top of the PDA.
2. Attach fully charged battery. Then, while press and holding right arrow button, press the power button briefly to enter the boot menu.
(AlphaNumeric) or 
(QWERTY)
|
M3 ORANGE(OX-10)+ Boot Menu
|
|
[ STANDARD BOOT MENU X.X.X ]
1) SD Download
2) USB Download
3) Clean Boot
4) Factory Reset
5) Device ID(UUID)
6) D_Serial :Comport8
7) All Format
Select Number
0) Exit : Launch OS Image
Hardware Version: NWSCBP
CPU : SAMSUNG-S5PC100 833MHz
RAM 256MB / ROM 1GB
|
3. From the boot menu, select 1) by pressing the number on the keypad to enter the SD update menu.
|
M3 ORANGE(OX-10)+ CE Boot Menu
|
|
[ SD Update MENU ]
1) EBOOT.BIN
2) NK.BIN
3) EBOOT+NK.BIN
Select Number :
0) Return to BOOT MENU!
|
4. Select EBOOT+NK.BIN to precede OS update.
|
M3 ORANGE(OX-10)+ CE Boot Menu
|
|
[ SD Update MENU ]
1. OS : S5STHQ6127EN
File : STCE27EN.BIN
0. Power Off
|
5. From the list of OS files, select the correct OS file and corresponding number.
Update Start! Message will appear at the bottom of the screen.
6. When OS update is complete, Download Complete Please Long Press Reset message will appear and the scanner LED on top left corner will blink. Then, press and hold the reset button at the back of the PDA.
