To update OS via USB, M3 ORANGE(OX-10)+ CE desktop cradle and USB cable is required.
1. Attach fully charged battery. Then, while press and holding right arrow button, press the power button briefly to enter the boot menu.
(AlphaNumeric) or (QWERTY)
M3 ORANGE(OX-10)+ CE Boot Menu
[ BOOT MENU x.x.x ]
1) SD Download
2) USB Download
3) Clean Boot
4) Factory Reset
5) Device ID(UUID)
6) D_Serial : Debug Mode
Select Number :
0) Exit : Launch OS Image
Hardware Version: NWSCBP
CPU : SAMSUNG-S5PC100 833MHz
RAM 256MB / ROM 1GB
2. From boot menu, select 2) by pressing the number on the keypad. From USB download mode, select 1) USB Download. Then connect the PDA to PC using the desktop cradle.
M3 ORANGE(OX-10)+ CE Boot Menu
[ USB Download Mode ]
1) USB Download
0) Return to BOOT MENU!
M3 ORANGE(OX-10)+ CE Boot Menu
[ USB Download Mode ]
USB Download Ready..
Please Send Image File
0) Power Off
3. USB driver must be installed. To download USB driver click DONWLOAD.
4. Once the driver is installed successfully, send the OS image file from PC to the PDA through USBDown.exe. To download USBDown click DONWLOAD.
5. Launch USBDown from the PC and select All Image follow by Open.
6. Select .BIN file and click Open.
7. Then, click Start on USB Downloader to start OS update.
Downloading message will appear on the bottom of the screen.
8. When OS update is complete, Download Complete Please Long Press Reset message will appear and the scanner LED on top left corner will blink. Then, press and hold the reset button at the back of the PDA.
(QWERTY)
