Cannot connect the Internet and obtain the IP address after WLAN configuration correctly.
If you are unable to access the Internet (this assumes that you are actually able to access the Internet from your workstation, of course) and you can also see the icon, click it and choose that the network card connects you to “The Internet” instead of “Work” – you should be able to access the internet now. (This automatic network selection process only appears when it’s never done by any reason.)
If you can’t see the icon(or missed above steps), follow the steps below.
1. Tap the “Start” menu and select “Settings”. Then tap the “Network Cards” icon.
2. Change the “My network card connects to” value from “Work” to “The Internet”. <Left : WLAN, Right : Ethernet interface>
3. Internet should work now – give it a try!
4. If it still doesn't work, consult your network administrator. The network adapter is configured to use DHCP by default to get a network address, which might not work on high-security corporate networks. In this case, an IP address will have to be assigned manually (in the “Configure Network Adapters” dialog above – tap “Summit WLAN Adapter or SMSC9500 …” in the list) by the network administrator.
icon, click it and choose that the network card connects you to “The Internet” instead of “Work” – you should be able to access the internet now. (This automatic network selection process only appears when it’s never done by any reason.)
